As the air leaked from the holes, those particles attached to the edges and steadily built up to form an airtight seal
Last summer, I was not cheerful with the performance of the central a/c. The method seemed to run just about non stop and yet couldn’t keep up with demands. The house felt hot and sticky. There was also a significant temperature swing from 1 room to another. A musty stink and great deal of dust was originating from the supply vents. Whenever the a/c operated, I’d get a headache… Plus, our monthly electric bills were abruptly far more expensive. While the part experienced unusually warm and humid weather, I knew something was wrong with the a/c. I googled the problems and determined that the problem was most likely with the ductwork. I found a local Heating as well as Air Conditioning supplier that offers duct method services and tied up testing. The supplier determined that nearly thirty percent of the conditioned air was escaping through small holes and leaks at the seams, however because the ductwork is largely concealed inside walls and ceilings, I wondered how the supplier would provide sealing separate from causing a lot of disfigure. I l received that there is a process called Aeroseal duct sealing that repairs flaws in the ducts from the inside. The supplier blocked off the supply and return vents before sending highly pressurized air into the pipes. The air carried polymer particles that are non-toxic yet adhesive. As the air leaked from the holes, those particles attached to the edges and steadily built up to form an airtight seal. The supplier then inspected the duct method to verify the success of the results. The whole process was completed within a couple of fourths and is warrantied for more than nine years.